blendSMARTEveryday Beauty - 3 Heads

One motorized handle. Three brush heads. Half the time at the mirror.

The blendSMART Everyday Beauty Set replaces three separate brushes with one rotating handle and three interchangeable heads. Press the button, hold the brush against the skin, and the bristles do the blending work for you — evenly, in seconds, with less product than you'd use by hand.

How the Rotation Works

The motor spins the brush head at a controlled speed. Instead of dragging product across the skin with manual strokes, the bristles buff it in from every angle. That's what gives the airbrushed finish — and it's why you end up using noticeably less foundation, powder, or blush per application.

What's in the Kit

Everything you need to cover the three main steps of a base routine, in one box.

• Motorized handle — the body of the system. Press-and-hold button starts the rotation, release to stop.
• Foundation head — denser, flat-domed bristles for liquid and cream coverage.
• Powder head — softer, fuller bristles for setting powder and bronzer.
• Blush head — smaller, tapered shape for precise cheek placement without overdoing it.
• CR123A battery — pre-fitted. No charging cable, no docking station.
• User manual — head-swap instructions and care notes.

Why Less Product Goes Further

Manual brushing leaves most of the pigment sitting on the bristle tips. The rotation pulls product down into the bristles and distributes it evenly as you work, so coverage builds with fewer pumps from the bottle. Most users report cutting their foundation use by roughly half within the first week.

Head-Swap in One Click

Brush heads pop on and off the handle with a single push. No tools, no twisting, no alignment marks. Switch from foundation to powder in under three seconds.

Specs

Power: CR123A battery (included). Components: 1 handle + 3 brush heads + battery + manual.

✓ Motorized rotation does the blending — no manual buffing needed
✓ Three interchangeable heads cover foundation, powder, and blush in one kit
✓ Uses noticeably less product per application — the rotation distributes pigment into the bristles instead of leaving it on the tips
✓ Cuts daily base routine time by roughly half
✓ Heads pop on and off in one click, no tools required
✓ CR123A battery included and pre-fitted, no charging cable to keep track of
✓ Lightweight handle holds steady at any angle, including upside-down for under-eye work
✓ Salon-style airbrushed finish without buying a compressor

1. Choose your head. Foundation for liquid/cream base. Powder for setting powder or bronzer. Blush for cheeks. Click it onto the motorized handle until you feel it lock.

2. Prep your skin first — moisturizer and primer should be fully absorbed before you start. The rotation works best on a slightly tacky, not wet, surface.

3. Dispense product onto the back of your hand, not directly onto the brush. Two pumps of foundation is enough for the full face.

4. Pick up a small amount on the bristle tips. Less than you think — the rotation spreads pigment further than a manual brush.

5. Press and hold the button to start the rotation. Place the spinning brush flat against your skin, starting at the centre of your face.

6. Work outward in small circular motions — forehead, cheeks, nose, chin. Keep the pressure light. Let the bristles do the work; pressing harder doesn't add coverage, it just removes product from the skin.

7. For powder, tap off excess on the back of your hand before applying. For blush, use the smallest brush head and start with a 2-second press on the apple of the cheek, then blend outward.

8. Build coverage in thin layers. One full pass for everyday wear. A second pass over high-coverage zones (under eyes, redness, blemishes) only if needed.

9. Release the button to stop the rotation. Pop the head off, store the handle, and clean the head per the care instructions.

1. Always remove the brush head before cleaning. The motorized handle is not waterproof — water inside the body damages the motor and voids the warranty.

2. Wash brush heads weekly with a mild soap (baby shampoo or a dedicated brush cleaner) and lukewarm water. Swirl the bristles in your palm, rinse until the water runs clear, gently squeeze out excess water with a clean towel, reshape the bristles, and air-dry flat overnight. Never use a hairdryer — heat warps the bristle base and loosens the glue.

3. Wipe the handle with a dry or barely-damp microfibre cloth. Avoid alcohol, acetone, perfume sprays, and oil-based cleaners on the body — they degrade the matte finish over time.

4. Replace the CR123A battery as soon as the rotation slows or stutters. A weak battery puts strain on the motor. Remove the battery completely if you're storing the kit for more than 30 days, to prevent leakage damage.

5. Detach the brush heads before storing. Storing with heads attached compresses the bristles into a flat shape that's hard to recover.

6. Store the kit flat in a drawer, vanity tray, or the original box — away from direct sunlight, radiators, and high-humidity spots like an open bathroom counter. Heat and humidity warp the bristles; UV fades the handle finish.

7. For travel, pack the handle and heads separately inside a soft pouch or hard case. Keep the battery installed for short trips; remove it for flights longer than 8 hours or if checking the kit into hold luggage.

8. Do not drop the handle. A hard impact can misalign the motor shaft and cause the rotation to wobble.